Applications:Â
Conductor(AAC and ACSR) have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
Standard:Â
Can comply with IEC61089, ASTM B232, BS215, GB, DIN etc.
Construction:Â
IEC 61089 A1/S2B
| Nominal Cross-section | Nominal Cross-section | Code | Steel rate | Structure | O.D. | Max. DC resistane of conductor at 20ºC | Breaking load |  Weight of material | Approx. weight of conductor | |||||||||
| Aluminum | Steel | |||||||||||||||||
| Aluminum | / | Steel |  | Number of wires | / | Diameter | Number of wires | / | Diameter | Steel core | Conductor | Aluminum | Galvanized steel wire | |||||
| mm2 | mm2 | / | mm2 |  | % | n | / | mm | n | / | mm | mm | mm | Ω/km | kN | kg/km | kg/km | kg/km |
| 25 | 25 | / | 4 | GOPHER | 16% | 6 | / | 2.36Â | 1Â | / | 2.36 | 2.36 | 7.08 | 1.093 | 9.61 | 71.9 | 34.0 | 105.9 |
| 30 | 30 | / | 5 | WEASEL | 17% | 6 | / | 2.59Â | 1Â | / | 2.59 | 2.59 | 7.77 | 0.9077 | 11.45 | 86.6 | 41.0 | 127.5 |
| 40 | 40 | / | 7 | FERRET | 18% | 6 | / | 3.00Â | 1Â | / | 3.00 | 3.00 | 9.00 | 0.6766 | 15.20 | 116.1 | 55.0 | 171.1 |
| 50 | 50 | / | 9 | RABBIT | 18% | 6 | / | 3.35Â | 1Â | / | 3.35 | 3.35 | 10.05 | 0.5426 | 18.35 | 144.8 | 68.6 | 213.4 |
| 70 | 70 | / | 43 | HORSE | 61% | 12 | / | 2.79Â | 7Â | / | 2.79 | 8.37 | 13.95 | 0.3936 | 61.20 | 202.7 | 334.6 | 537.3 |
| 100 | 100 | / | 14 | DOG | 14% | 6 | / | 4.72Â | 7Â | / | 1.57 | 4.71 | 14.15 | 0.2733 | 32.70 | 288.6 | 106.0 | 394.6 |
| 150 | 150 | / | 37 | WOLF | 25% | 30 | / | 2.59Â | 7Â | / | 2.59 | 7.77 | 18.13 | 0.1828 | 69.20 | 436.6 | 288.4 | 725.0 |
| 150 | 150 | / | 9 | DINGO | 6% | 18 | / | 3.35Â | 1Â | / | 3.35 | 3.35 | 16.75 | 0.1815 | 35.70 | 437.0 | 68.6 | 505.6 |
| 175 | 175 | / | 43 | LYNX | 25% | 30 | / | 2.79Â | 7Â | / | 2.79 | 2.79 | 19.53 | 0.1576 | 79.80 | 506.7 | 334.6 | 841.3 |
| 175 | 175 | / | 10 | CARACAL | 6% | 18 | / | 3.61 | 1Â | / | 3.61 | 3.61 | 18.05 | 0.1563 | 41.1 | 507.5 | 79.6 | 587.1 |
| 200 | 200 | / | 49 | PANTHER | 25% | 30 | / | Plug-in Terminal Block Plug-in Terminal Block It is made of two parts of plug-in connection. One part compresses the wire and then plugs it into the other part, which is welded to PCB. The mechanical principle of the connection bottom and the anti vibration design ensure the long-term airtight connection of the product and the use reliability of the finished product. The two ends of the socket can be equipped with lugs, which can protect the lug to a large extent and prevent the poor arrangement of the lug.
At the same time, this kind of socket design can ensure that the socket can be inserted into the matrix correctly. Plug-in Terminal Block ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com | ||||||||||