Simple configuration of infrared learning function

The infrared learning function only supports "TV" equipment in the "living room" and "main bedroom" on the 1-3th floor. “Up button” and “Down button” respectively correspond to TV “channel+—” infrared code learning; “left button” and “right button” respectively correspond to TV's “volume+—” infrared code learning.

(1) Learn how to operate. In the normal operation menu, you need to learn the infrared TV equipment. At the same time press the “SET” and “7” buttons for 1s to enter the infrared code learning menu.

Press the "Up button", the "information prompt area" will flash, suggesting that you can start learning "channel +" infrared code of the TV remote control.

(2) Specific operations. Point the TV remote controller at the infrared receiver window of the handheld controller, press “Channel+”, if it is successful, it will stop flashing, and then press “Confirm” to save. The learned infrared operation code will disappear at the same time, and it can be pressed again. "Up button" to learn again.

Press the "Down button", "information prompt area" will appear flashing, suggesting that you can start learning TV channel "channel -" infrared code.

(3) Specific operations. Point the TV remote controller at the IR receiver window of the handheld controller and press “Channel—”. If the learning is successful, stop flashing. - Press “Confirm” again to save. The learned infrared operation code will disappear at the same time, and you can press it again. Under the "down button" to learn again.

Press the "left button", "information prompt area" will appear flashing, suggesting that you can start learning TV remote control "volume ten" infrared code.

(4) Specific operations. Point the TV remote controller at the IR receiver window of the handheld controller and press “Volume +”. If the learning succeeds, stop flashing. Press “Confirm” to save. The learned infrared operation code disappears at the same time, and it can be pressed again. Left click to learn again.

Press "Right-click", the "information prompt area" will flash, suggesting that you can begin to learn the "volume-" infrared code of the TV remote control.

(5) Specific operations. Point the TV remote controller at the infrared receiver window of the handheld controller, press “Volume—”, if it is successful, it will stop flashing, and then press “Confirm” to save. The learned infrared operation code will disappear at the same time, and it can be pressed again. "Right-click" to learn again.

Long press the "Settings" button to return to the operation menu.

(6) Restore factory settings. Simultaneously press the "Settings" and "9" buttons for 1s to enter the Restore Factory Settings menu.

The interface displays “C” in the “symbol” field and four “C—” characters waiting for the input of the initial password. Press "Up", "Down" to enter the current digit, "Left", "Right" to select the next digit, the default password is 1234.

After entering the password, press the "Confirm" key to enter the factory reset processing interface. After a few seconds, the device completes the operation and returns to the power saving mode.