Solar Photovoltaic System DC 1200V PV Lightning Surge Protection Device

Model NO.: DK-DC40 Surge Protection Device
Shape: Cuboid
Material: ZnO
Certification: ROHS, ISO9001, CCC, Ce
Brand: Dikai
Nominal Discharge Current in(8/20): 20ka
Maximum Discharge Current Imax(8/20): 40ka
Protection Class of Shell: IP20
Working Voltage: DC1200V
Protection Mode: +-PE, - -PE, + - -PE
Voltage Protection Level up: Less Than 3.5kv
Respond Time Ta: Less Than 10ns
Indication Method: Indication Window,Turn Red When Malfunction
Flame Retardant Rating of Outer Shell: UL94-V0
Remote Alarm Function: on/off
Trademark: Dikai
Transport Package: Packed by Carton
Specification: IEC61643, ISO9001: 2008
Origin: Nanning City, Guangxi, China
HS Code: 8536300000
Solar Photovoltaic System DC 1200V PV Lightning Surge Protection Device

Product Introduction
module PV Series DC surge protection device (short for SPD) can be installed in front of the low-voltage distribution system. It can prevent the system and equipments from the permanent damage caused by induced over-voltage, over current, and other induced surge voltage. It meets the IEC and GB18802.1 standards. The quality control is under strict ISO9001 Quality Assurance system.
This product uses high temperature and resistant flame retardant plastic shell. It takes the features of good sealing, good appearance, easy installation, dustproof anticorrosion flame retardant, long service life under a harsh environment etc.
 It is designed as module with 35mm electrical lead rail. Each line of SPD module has working indicator window. When the indicator window shows green, the SPD is normal, shows red, the SPD is failure.
With temperature control breaker, build-in over current fuse protector, thermal inductance breaker and degradation automatic release, it can avoid the fire danger. With remote alarm connector, it can facilitate remote monitoring and realize automation management. Its protection mode is L-PE.

Technical Parameter
Product DC Surge Protector device
Product type DKG-30(20,40,60)/1000 3P
Applicable Power Supply System Low Voltage System
Maximum Continuous Operating Voltage Uc DC1000V&1200V&500V
Nominal Discharge Current (8/20µs) 15KA&10KA&20KA&30KA
Maximum Discharge Current(8/20µs) 30KA&20KA&40KA&60KA
Voltage Protection Level Up ≤3.2KV
Leakage Current ≤30Ua
Respond Time tA ≤10ns
Indication Method Indication Window,Turn Red When Malfunction
Remote Alarm Function On/off
Maximum Connection Wire Range BVR 25mm2
Method of Installation 35mm Din Rail Mounted
Material of Shell PA6
Flame Retardant Rating of Outer Shell UL94-V0
Protection Level of Outer Shell IP20
Working Temprature -25~+70ºC
Relative Humidity ≤95%RH
SPD Type One-port SPD(Parallel)

Application Scope
Suitable for Lightning Protection of Solar Energy DC Power Distribution System.

About Dikai Company
 -More than 26 years specialized.
-25,000 square metres industrial park.
-More than 100,000 cases of lightning protection project services.
-Five series lightning protection products, more than 160 items.
-ISO ,OHSAS & CE certificated.
-CNAS National Laboratory.

53 Modular Jack

53 Jack.We are manufacturer of 6p6c Female Connector in China, if you want to buy RJ11 Jack Full Plastic MINI,6 Pin RJ11 Modular Connector,RJ11 Jack Full Shielded please contact us.

The RJ-45 interface can be used to connect the RJ-45 connector. It is suitable for the network constructed by twisted pair. This port is the most common port, which is generally provided by Ethernet hub. The number of hubs we usually talk about is the number of RJ-45 ports. The RJ-45 port of the hub can be directly connected to terminal devices such as computers and network printers, and can also be connected with other hub equipment and routers such as switches and hubs.

6p6c Female Connector,RJ11 Jack Full Plastic MINI,6 Pin RJ11 Modular Connector,RJ11 Jack Full Shielded

ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com

Posted on