Sony A7RIII dismantling: how to dismantle the process to show you

The Sony A7RIII should be regarded as one of Sony's most noteworthy full-frame micro-singles this year, and this latest Sony high-pixel flagship was completely dismantled for the first time on the overseas Kolarivison website. This new Sony full-frame micro-single has undergone considerable changes in the design of the fuselage. How does the workmanship work? There are also those bright halls in the fuselage. Let's take a look at the disassembled photos.

How is the Sony A7RIII process

Disassembly begins with disassembly of the flip screen

How is the Sony A7RIII process

Then disassemble from the bottom

How is the Sony A7RIII process

You can see that the metal body bottom plate at the bottom of the camera uses a hollow design to reduce weight

How is the Sony A7RIII process

After removing the back screen, the camera motherboard is exposed

From the process point of view, the disassembly of this A7RIII is from the bottom of the camera after the disassembly of the flip screen, and we can also see many details from the disassembly of the fuselage: the tripod mouth is made of metal, However, the metal frame at the bottom of the tripod and the camera is separated, and the two are fixed by screws. As can be seen from the main board of the fuselage, the main board of the camera camera under the dual card slot has a new integrated design. The card slot on the motherboard also shows that the camera's memory card slot is divided into one for UHS-II and one for ordinary cards.

How is the Sony A7RIII process

The top of the fuselage after disassembly

How is the Sony A7RIII process

Separate motherboard and body

How is the Sony A7RIII process

Motherboard cable

How is the Sony A7RIII process

Disassembled EVF electronic viewfinder

How is the Sony A7RIII process

CMOS and snap frame

How is the Sony A7RIII process

Camera motherboard

How is the Sony A7RIII process

CMOS close-up

How is the Sony A7RIII process

A7RIII group photo after dismantling

Editor's comment: How to install the body anti-shake, dual card slot, large capacity battery, and full-frame sensor under a small body. I believe you can learn a lot from the dismantling of this A7RIII. From the point of view of technology, Sony has done a lot of work on the stability and weight of the fuselage. The highly electronic micro-single system does have more advantages in the miniaturization of the fuselage. However, it is a bit confusing, should the A7RIII be so called a metal body? Or should it be a metal skeleton?

Home Use Switch And Socket

Home Use Switch And Socket,Home Use Switch,Home Use Socket,Home Use Switch For Sale

ZHEJIANG HUAYAN ELECTRIC CO.,LTD , https://www.huayanelectric.com

Posted on