Lamps also need regular cleaning and maintenance to maintain the brightness of the lighting

Release date: 2018-08-13 Source: Rich lighting sharing:

If you don't get the cleaning and maintenance you deserve, then the high-end lighting will soon be dull. As with other furniture, the lamps also require regular cleaning and maintenance to maintain the brightness of the lighting and extend the life of the lighting. The lampshade is dimmed by dust, and if it is not treated in time, it will reduce the brightness by about 30% evenly every year. Therefore, it is especially important to clean the lampshade and the lamp or bulb at regular intervals.

After the top of the list and buy the lamps, don't be busy with the device. You should carefully look at the markings of the lamps and read the instructions for the device, and then install the lamps according to the instructions. Otherwise, risks may occur.

Secondly, replace the aging lamp with the light source parameters supplied by the mark, and find that when the lamp has two hair red, the lamp is black or has a black shadow, and the lamp does not illuminate, the lamp should be replaced in time to prevent the ballast from being presented. Unsafe phenomena such as burnout;

Third, when cleaning and protecting, you should pay attention not to change the structure of the luminaire, and do not replace the parts of the luminaire at will. After the cleaning and protection is completed, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced;

Fourth, the lighting should be strengthened in the operation, and the life extension should be extended. The lamp of the room should always be scrubbed with a dry cloth, and pay attention to prevent moisture intrusion, to prevent the phenomenon of rust damage or short circuit leakage. The lamp installed in the toilet and bathhouse must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened. The lamp installed in the kitchen should pay special attention to the anti-smoke, because the accumulation of grease will affect the illumination of the lamp; the light-colored lampshade has good transparency, but it is simple to stick to ash, and should be diligently scrubbed to prevent the penetration of light; If the lamp is non-metallic, it can be wiped with a damp cloth to prevent dust from accumulating and hinder the lighting effect;

Fifth, when using the luminaire, try not to switch frequently. Because the current of the filament is higher than the current during normal operation, the filament temperature rises sharply and increases, which will greatly reduce the service life. Therefore, it is necessary to reduce the switch of the lamp as much as possible.

Special Note:

Moisture can easily lead to rusting and falling paint, and shorten the service life of the lamp. Therefore, moisture protection is the key to lighting maintenance, especially in the bathroom, bath lamps and kitchen stove lights, should be equipped with moisture-proof lampshades to prevent moisture intrusion, to prevent rust damage or leakage short circuit.

It is best not to wash the lamps with water. Just wipe them with a dry cloth and wipe them with water. If you accidentally touch the water, wipe them off as much as possible. Do not scrub with a damp cloth immediately after turning on the lights.

More lighting information is available at https:// .

Label: lamps wholesale lighting procurement lamps to join billion lamp network

Outdoor Front-service Iron Case Led Wall

Outdoor Front-Service Iron Case Led Wall,Led Display Billboards,Digital Led Display,Advertising Led Wall Media Production

Guangzhou Cheng Wen Photoelectric Technology Co., Ltd. , https://www.cwledwall.com