According to Cree, the record broke the 231 lm/W R&D results achieved at the beginning of last year. Cree's innovative SC3 technology platform (ie, third-generation silicon carbide technology) used by Cree's third-generation lighting-grade XLamp® LEDs is the key to achieving this development.
Cree pointed out that the innovative SC3 technology platform uses the company's silicon carbide (SiC) technology to demonstrate superior performance in LED chip structure and fluorescence conversion, and to match the latest packaging technology to provide the industry's most advanced LEDs. Device.
John Edmond, co-founder of Cree and director of Advanced Optoelectronics, said that high-performance LEDs can not only help achieve better creative and better-effect LED lighting applications, but also significantly and effectively reduce LED design and overall For the cost of the solution, Cree will promote the ultimate popularity of LED lighting through unremitting innovation.
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Backlit, Backlit socket, power meter Backlit, energy meter Backlit, backlit adaptor, backlit plug socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com